The SUNRAY400SM is a compact UV flood curing system. Unlike competitors units, the SUNRAY integrates all system components into a small lamp head which can be easily mounted anywhere on a factory floor, with virtually no cabling or remote control boxes required. Just mount the head, connect the AC line cord, and start curing! The long life
400-Watt metal halide type lamp and parabolic reflector illuminate an 8 x 6 inch curing
area with evenly distributed 100mW/cm2 UVA light (320–390nm). The arc lamp is powered
by the state of the art UV Power-Plus Lamp Driver. The head features a convenient carrying
handle and sliding height adjustment bracket.

FEATURES:

Auto-Range AC line input: The Auto-Ranging 90-132 / 180-265 VAC line input makes the SUNRAY easy to use in any country, with no wiring changes or voltage select switching required.

Lamp power regulation:  The system’s switch mode power supply maintains constant
lamp power regardless of variations in AC line input or lamp voltages. This regulation
provides for repeatable curing times and longer lamp life.

Standby mode:  The unit features a standby mode rocker switch, which reduces lamp
power by one half. This mode can be used to reduce heat and stray UV light output while
the system is not in use.

Elapsed hour meter:  A front panel hour meter tracks lamp age, allowing for consistent lamp replacement scheduling. 

Forced air cooling:  Baffled fan cooling directs air to critical system components, insuring
cool operation and high system reliability.

Optional lamp spectrums:  The SunRay is available with UVA, UVB & visible spectrum lamps, which insure compatibility with adhesives and coatings from all manufacturers.